Get a U.S Address for Free! 

Breaking News, Jobs, Banking, Finance, Politics, and Sports

Aug. 23, 2022 – Pick up your smartphone. Yes, you’ve held it a thousand times, it’s like an extension of your hands. But let’s do an experiment: Grab it by both ends and stretch it out as far as it will go. Now twist it. Wrap it around your forearm. Cool, right? Now let it snap back.

Wait, what do you mean your phone won’t bend and stretch?

That little exercise in imagination illustrates what’s possible in the realm of wearables – electronic devices we wear close to or on our skin. Today, smartwatches and phones are still hard, inflexible blocks of plastic and metal. Tomorrow, all that will change.

“In wearables, flexibility, stretchability, and washability are all key requirements,” says Veena Misra, PhD, a professor of electrical engineering at North Carolina State University and director of the ASSIST Center, a federally funded research institute that develops wearables to aid health.

We tend to think of wearables as fun consumer gadgets, but a growing school of thought says they will drastically improve health care – providing a vehicle for continuous, long-term monitoring to predict adverse events and closely track disease, improving treatments and health outcomes worldwide.

For that to happen, wearables must work seamlessly with our bodies. That means making conventionally hard, rigid devices and systems more like human skin – soft, bendable, and stretchable.

How does one manage that? By redesigning electronics at the molecular level, miniaturizing sensors, and creating unheard-of power sources to support what engineers call a skin-like “form factor.”

To coin a phrase, it ain’t science fiction. It’s happening as we speak, and the new products these advances will create – potentially starting in health care and crossing over to the consumer wellness market – could become as normal as that clunky, inflexible phone you can’t put down. Here’s how.

A wearable that conforms to your body is better in two crucial ways: It’s less obtrusive for the user, and it allows for a more reliable measurement.

“Sensors and sensor systems a lot of times suffer from mechanical mismatch,” says Alper Bozkurt, PhD, an electrical engineer, and Misra’s colleague, at NC State and ASSIST. “If you have soft tissue that’s moving around, but a rigid sensing device that’s not moving around, your measurement may not be reliable.”

That’s because all that extra banging around between the device and your body shows up as “noise” – meaningless information that can distort the measurement and may lead to false conclusions.

Then there’s the “human factor,” Bozkurt notes – the issue of compliance.

“One of the challenges is, we design things in the lab, test everything, and bring it to our medical operators, and they raise their eyebrows and say, ‘No, my patients are not going to wear this,’” Bozkurt says. “You cannot imagine a future for wearables without solving the compliance issue.”

A wristwatch may seem comfortable enough, but applications extend beyond what a wristwatch can enable, notes Michael Daniele, PhD, a fellow member of the NC State / ASSIST team, who studies soft nanomaterials to engineer devices that monitor, mimic, or supplement body functions.

Wearable devices are being developed to help patients and even treat them in ways “in which the patient’s comfort is a priority,” he says.

Take the use of electrodes and electronics in lower-limb prosthetic sockets as an example, he says. “Picture a few metal screws pressing into your limb that you are supporting all of your weight with, or picture filling your shoe with an array of rocks. That’s the state of wearables for such a user.”

One way is to take hard things used to monitor health – like silicon chips – and make them so thin they become flexible. Among the first to demonstrate this kind of material technology in skin-like wearable devices was John Rogers, PhD, in 2011, in a landmark Science paper titled Epidermal Electronics.

“We’d been pretty active in that field for a number of years,” says Rogers, who at the time was at the University of Illinois and has since moved to Northwestern University. “But then we realized that even silicon – which most people think of as a very rigid, brittle rock-like material – can be made into forms and shapes, and at thicknesses that allow it to be bent and … even stretched.”

Rogers, whose team has several applications in development, uses an etching technique to shave off the surface of a semiconductor wafer.

“It turns out all the action in those integrated circuits is happening on that very-near-surface layer,” he says. “All of the silicon underneath is just serving as a mechanical support.”

Still others use a different approach, building electronic parts from scratch out of materials that are inherently soft and stretchy – polymers. This is the kind of work Stanford chemical engineer Zhenan Bao, PhD, does, using a range of polymers with conducting properties.

“In our work, we gain a fundamental understanding on how to design plastic molecules so that they have the functions and properties we want,” Bao says. For skin-like electronics, the plastics are designed – on a molecular level – to be conductive, elastic, and soft.

One of the newest creations out of Bao’s lab is a polymer that lights up, enabling skin-like visual displays. She imagines a skin patch with the display right on it, or going further, a telehealth appointment where the doctor could see and feel the texture of the patient’s skin via a three-dimensional, lifelike display. Example: One exam to check for severe water retention in heart failure patients is to press on the skin to see if it bounces back, Bao says. The patient would wrap an electronic sticker around their leg and press on it to generate a display for the off-site doctor. “The doctor would be able to feel on the display the texture of the skin that the patient would feel,” she says – from a remote location.

More Wild Advances: Liquid Metals, Plasma Bonding, Chemical Sensors

Still other developments are continuing. Advancements in liquid metals allow for stretchable conductive wires. Textile-based, moisture-resistant antennas can transmit data while worn close to the skin. Methods like water vapor plasma bonding attach thin metals to soft polymers without losing flexibility or using high temperature and pressure that can damage super-thin electronics.

Sensors are improving too – that’s the part that interacts with whatever you’re trying to measure. Most commercial wearable sensors are mechanical (used to track physical activity) or optical (heartbeat, pulse oximetry). But chemical sensors are in development to measure internal markers in the body as well. These are critical in revealing the full picture of your health, says Joseph Wang, a doctor of science and professor of nanoengineering at the University of California, San Diego, who has published research on biosensors and wearable devices.

This is where the new tech can get really geeky. Chemical sensors are made from some of the most exotic nano materials, including graphene, carbon nanotubes, and gold nanoparticles, Daniele says. Some (glucose sensors in particular) use enzymes that bind to target molecules. Others use aptamers, short single strands of DNA or RNA.

Chemical sensors typically work with body fluid such as sweat, saliva, tears, or – as is the case for continuous glucose monitors – interstitial fluid (the liquid between the cells in your body).

“Most of the things you want to measure in blood you’ll be able to do in interstitial fluid if you have the sensor technology,” says Jason Heikenfeld, PhD, a professor of electrical engineering at the University of Cincinnati. Just imagine having a full blood workup done by simply putting on a skin patch, no blood sample required.

Sweat sensors may also find a place in at-home tests, Heikenfeld says. “If there was a people’s choice award for bio fluids, sweat would win,” he says. “We don’t want to do blood, don’t want to drool in a cup, don’t want to mess with a urine stick. Tears, forget it. The test would be a simple patch you slap on your arm; collect some fluid, put it in an envelope, and mail it to a lab.”

Wearable Power Sources: Beyond AA Batteries

If you want to create a stretchable, flexible electronic device, you’ll need a stretchable, flexible, and even washable way to power it. Many of today’s wearables, like smartwatches, are powered by very small but still rigid batteries, Bao says. Hence the bulky form.

This demand has prompted researchers from across the globe to develop batteries that can stretch and flex. To name just a few recent examples, Canadian researchers developed a flexible, washable battery that can stretch to double its original length and still function. In Singapore, scientists created a paper-thin biodegradable zinc battery that you can bend and twist and even cut with scissors – like any piece of paper – and it will still work. Still others are engineering batteries into long strips that can be used in smart clothing.

Another option is wireless power, Bao says. The battery does not need to be in the device – it can be in your clothes or your pocket and still power the sensors. Bao’s lab at Stanford has developed a sticker-like wearable called BodyNet that can be charged using radio-frequency identification, the same technology used to control keyless entry to locked rooms.

Still others – like Misra and her colleagues at ASSIST – are exploring battery alternatives like energy harvesting, or converting body heat, solar energy, or movement into power.

Just imagine: No more worrying about the battery dying, getting wet, or having to be recharged. “Your body is the battery,” Misra says.

For wearables to truly reach their full potential, all the parts must become more power-efficient and come together in a flexible, stretchable package, Misra says. They also must be designed in such a way that millions, if not billions, of people will want to wear them.

Just as important: Devices destined for the medical world must provide top-quality data. If the collected data isn’t gold standard, what good is it? And all that data needs to be turned into useful information. That’s where data analytics, machine learning, and artificial intelligence come in. “These are not unsolvable problems,” Misra says, “but they’re exciting problems that a lot of the community is working on.”

Bottom line: Our wearable future is well on its way.

Go to Source Author: PeakNews

DISCLAIMER: Opinions and articles are solely the responsibility of the author and does not necessarily reflect the views of the publishers of Dmartpreneur Media.

ADVERT/PUBLICATION: Reach the right people at the right time with Dmartpreneur Media. Try and advertise any kind of your business to users online today. Kindly call or WhatsApp us for your advert or publication on +2348084971458